Automate your tests and inspections without stopping the line.
Test benches, machine links, QR tracking and vision checks, built for your line and handed over with the source code.
- Every test runs the same way and saves its own report.
- Every part gets a QR code and a full history.
- Cameras catch defects before your customer does.
Shop-floor software we run today
Rainbow Flex: jobs, batches with QR rack labels, QC and per-order P&L on the shop floor
Vision: a photo in, part identified, damage mapped by clock position
Shop-floor software that is live today.
Rainbow Flex runs coating shops end to end: inquiries and quotes, jobs per workstation, batches with QR rack labels, quality control, machines and wear parts, and a profit-and-loss per order that counts powder, labour, machine wear and energy.
Read the Rainbow Flex storyWhat it costs you today.
- Test results logged by hand, on paper or in Excel.
- No traceability when a customer complains.
- Inspection depends on one experienced person.
- Old test software nobody can change.
What the manual work costs you today.
Your numbers, your estimate. On the call we replace the guesses with measured minutes.
0
a year
0
hours of manual work a month
0
full-time people
Manual time plus escapes only. What a bench or a camera can take over is what we measure on the call.
We’ve built this before.
You leave with a written plan.
After the call you get your own Line Walk: your steps, your minutes, what to fix first and what it would cost. Yours to keep, even if you never hire us.
Book my free Line Walk callLine Walk
Example · illustrative numbers
Example: a component maker with 22 people on two shifts
One walk along the line: every test and inspection, how it is recorded, and where a bench or a camera pays.
| Station | Today | Min / part | Fix | Priority |
|---|---|---|---|---|
| Incoming inspection | visual, paper checklist | 2.0 | tablet checklist + photo, QR per lot | P2 |
| Leak test | gauge read by eye, Excel | 3.5 | bench logs pass/fail + curve automatically | P1 |
| Torque check | wrench, handwritten | 1.5 | smart wrench record per serial | P2 |
| Final visual QC | one senior inspector | 2.5 | camera pilot on the top 3 defects | P1 |
| Traceability | batch sheet in a folder | 1.0 | QR label opens the full part history | P1 |
Total manual time: 10.5 min / part + escapes that reach customers
Recommended first step: First milestone: leak-test bench software + QR traceability on one line. Camera pilot on real parts before any full build.
One station automated and accepted in 8 weeks.
We start with a Line Walk, write the test the station must pass, and build the software beside your running line. You keep the source code.
- Package
- 8-Week Line-Side Pilot
- Timeline
- A pilot station in 4–8 weeks
- Investment
- From $14,500 for one station, software onlyFrom €13,200 for one station, software only
- Hardware, fixtures, cameras and travel at cost. Support $400 a month.Hardware, fixtures, cameras and travel at cost. Support €360 a month.
What you get
- Line Walk, written upOne station, test or inspection step reviewed with you: what to automate and what to measure.
- Pilot station softwareOperator screen, data logging and reports, running beside production.
- QR part labelsEvery part gets a label and a history, from our own label designer.Label software alone costs $199 to $299 a year.
- Operator quick-guide filmA short film your operators can rewatch at the station.
- An acceptance test written before we startWhat the station must do to pass, agreed in writing.
- The source codeHanded over with the documentation.
Our promise
We write the acceptance test with you before we start, and the final milestone is invoiced only after the station passes it on your line. You keep the source code.
Who this is for
- One station, test or inspection step with a result you can measure.
- Access to the line for tests.
- Hardware bought or approved by you.
- A plant in the US or the EU.
Start free
Line Walk
A remote or on-site review of one station, test or inspection step: what to automate, what to measure, and what a pilot would prove.
Builds start one at a time; you get your start date on the call.
Before you book.
You don’t know our machines.
We start with a Line Walk and a pilot on your parts before any full build.
We can’t stop the line.
Pilots run beside production; cut-over is planned around your shifts.
IT won’t allow it.
We can run on-premise, offline, on your hardware, and hand over the source code.
Integrators quote a fortune and take a year.
We scope small: one station, one measurable result, then expand. A pilot station starts at $14,500 (€13,200), software only.
Is vision reliable enough?
We measure it on your parts and tell you where it isn’t. Our rim-inspection work is published with its limits.
Line Walk: free, 30 minutes.
A remote or on-site review of one station, test or inspection step: what to automate, what to measure, and what a pilot would prove.